We are currently the only Rife machine manufacturer to offer a Rife machine that
actually puts out Rife's original cancer frequencies. This device can
transmit frequencies from 1,800,000 hertz to 30,000,00 hertz. For
frequencies below 1.8Mhz simply multiply by to to find a harmonic in the range
the machine is capable of. In this sense, all of the Hulda Clark
frequencies are also available.
With the optional upgrade, the device can also transmit all Crane frequencies. The crane frequencies are from 20 to 10,000 hertz and are what most people mistakenly call the Rife frequencies.
Our device can transmit over to 100 watts of forward power through our unique flexible wire antenna system, with a measurable delivered power at least 25 times greater than any other system on the market.
Operation is simple. Simple plug the unit in, turn the power on, and key the trigger.
Like Rife in his clinic, only brief use is required or suggested until
individual tolerance is ascertained. Rife used his machines for 3 minutes
every third day. We suggest a 3 minute exposure for the first day.
If the die-off reactions are acceptable, then the protocol can be increased by 1
minute per day until the maximum of 15 minutes twice a day is achieved.
You can see in this oscilloscope tracing of the device that the power level is
so high that it goes off the chart, even at the highest voltage setting (5 volts
peak to peak per square).
Over 300 volts per meter is achieved at the antenna, over 4 times what is necessary to ignite a fluorescent bulb in mid-air.
Technical details
There is no tuner to operate, and no worry of burning out the amplifier. Although our system usually runs with a SWR of 1.3 or better, it will handle a SWR of 5 continuously without overheating the amplifier. Our power supply can run on either 110 or 220 volts.
Normal grounding is all that is necessary. An automatic temperature gauge will shut the power off if the unit gets too hot. The system also has a low and high power setting and will automatically go into low power mode if the SWR's are above 2.
Specifications